How To Fix A Power Window On A Dodge Caravan

Download Article

Download Article

If your car window is misaligned or stuck, only the hand crank or electric motor appears to be working fine, you lot may be dealing with an off runway window.^[1] Though never fun, off rails windows are a common automotive problem and tin be easily fixed at domicile.

1. 1

   Remove screws and bolts forth the interior of the auto door. Earlier fixing the window, y'all'll need to get access to the inside of the car door. For smaller problems like an off track window, you can exercise this by removing the interior car door panel, the plastic embrace concealing the car's window mechanisms. These are typically held in place past simple screws and bolts, significant you can remove them using a screwdriver and wrench. If the fasteners are particularly tight, use a power tool instead of a manual one.^[two]

   • For doors with standard panel fasteners, await for screws along the top, base, and side of the panel.
   • For doors where the fasteners are hidden or non-standard, bank check your owner's manual for diagrams and removal instructions.

2. 2

   Remove the crank handle, command switch, and other accessories if necessary. Depending on the make and model of your car, you may also need to remove a crank handle, window control switch, or any number of accessories including cupholders, arm rests, luggage bins, and door handles. Most of these can be taken off with the same tools as the door itself, though some may crave a specific tool or non-standard method of removal. Check your user's manual for details on car specific accessories.^[iii]

   Advertisement

3. three

   Popular the door console off using a thin, sturdy tool. With all the trims and fastenings removed, identify a modest, potent tool under the edges of the door. Press down on the tool gently to pop the door panel out. You may need to practise this in multiple spots effectually the panel to fully remove it.^[four]

   • Though any thin tool can exist used, ranging from small crowbars to thin pieces of metallic, specialty panel removal tools will make the job easier.

4. 4

   Remove coverings and unplug whatever wires connected to the door console. If your motorcar has any, pull back insulation or vapor barriers covering the inside of the door. Then, unplug any wiring keeping the panel fixed to the motorcar. When you're finished, remove the door console and put information technology to the side.^[five]

Advertising

1. 1

   Examine the window track for clothing. In some cases, an off track window may be caused by a broken or worn out runway. If areas in the track are rusted, apply a few drops of white lithium lubricant to them. If areas in the track are bent, try pressing them into shape using the back of a hammer, wrench, or other firm tool. If the rails is rusted or bent to the point of beingness unusable, y'all volition demand to supercede the window regulator and, virtually likely, the window motor.^[6]

   • Depending on your car'southward make and model, replacement regulators typically price between $190 and $270, not including a motor.

2. 2

   Add adhesive if your window rails is dry or rough. If your window track uses gum to hold the glass in place, touch it to brand sure it is notwithstanding gluey. If the window track is dry, crude, or cracked, squeeze a layer of Automotive Broth or like automotive adhesive into information technology.^[seven]

3. 3

   Inspect the electric window motor with a voltmeter. Over time, a bad window motor can cause the drinking glass pane to cease moving, making it appear off track or causing it to fall out of alignment. Cheque the motor for any articulate signs of damage, like dents or holes. If the device seems expert, connect voltmeter wires to the motor's connector terminals. If the voltmeter reads betwixt +12 and -12 volts, the window motor is in skillful working condition. ^[8]

   • If the motor seems fine but doesn't operate correctly, supervene upon the associated fuse in the fuse box. If it still doesn't work, check the window control switch by connecting an ohmmeter to it and looking for little to no resistance when the switch is pressed.^[9]
   • Depending on your car'southward make and model, wait replacement motors to price between $120 and $240, not including a regulator.

4. 4

   Check for bad wire connections. In some cases, a stuck or off-track window may take been caused by a loose or faulty wire. Examine each wire inside the door for kinks, tears, and other forms of damage. If they look good, make sure they're fully connected to the window motor. If the wires are damaged or broken, you will need to supersede them or, in some cases, the whole motor.^[10]

   • Though non always bachelor, model-specific replacement wires generally run between $15 and $50 dollars.

Advertizing

1. i

   Drop the window glass to the bottom of the window channel. Since yous will be realigning the glass, move it to the lesser of the frame that lines the inside of the car door, improve known as the window channel. Using ane paw, firmly slide the drinking glass down as far as yous can. If necessary, guide the bottom edge with your other manus.^[eleven]

   • If the window is stuck, run a thin utility pocketknife between the window and door to remove any blockage, and so go on sliding information technology downwardly. Keep the blade parallel to the window to avoid scratching it.
   • If the window will not move down, pull the panel out through the top opening and reinsert information technology.

2. 2

   Move the glass onto the window track. Move your window glass until it is lined up on the window track over again. Look for areas where the track is pinched, pressed down, or blocked and arrange the window accordingly. When you're finished, your window should sit down entirely within the rails. Window tracks are not uniform, then consult your possessor's manual for model specific instructions.^[12]

   • In some cars, you may need to remove the bolts on the window runway, slide the window in, and rebolt the runway.

3. iii

   Connect your glass to the window lift if necessary. Realigning your glass to fit the track may throw other parts of the window off, in particular the motor and other elements of the window regulator mechanism. Check to make sure that your window is connected to every office of the lift information technology needs to exist, consulting your possessor'due south manual for model specific data. If anything is not properly connected, gently arrange your glass or the lift itself to fix the trouble.^[13]

4. iv

   Cover your rollers and tracks with lubricant. Over time, your rollers and tracks will dry out, making it harder for them to raise and lower the window. To set this, clear the rollers and tracks of any dirt or dust using a brush or tin can of compressed air, then rub on a coat of Lucas Oil white lithium grease or similar white lithium lubricant. Avoid generic make lubricant like WD-40 unless you lot're using a specialty variant.^[14]

5. 5

   Test to make sure the window works. If possible, reattach but the crank handle or control switch and use them to test the repair. For some cars, you may need to reattach the unabridged door console earlier testing.

6. 6

   Reattach the door console. When you're finished checking and realigning your window, replace the door panel and everything you removed. Get-go by plugging in any wires you asunder and replacing any protective covers. Then, sideslip your console back in place followed past whatsoever accessories you removed. Finally, secure everything with the screws and bolts yous took out.

Ad

Add New Question

• Question

  How tin you tell if a window is off track?

  

  Duston Maynes is an Automotive Repair Specialist at RepairSmith. Duston specializes in leading a team that handles a diverseness of automotive repairs including replacing spark plugs, front end and rear brake pads, fuel pumps, car batteries, alternators, timing belts, and starter motors. Duston holds an Associate's degree in Automotive/Diesel fuel Engineering from The Universal Technical Institute of Arizona and is a Certified Diagnostic Technician and Auto Mechanics Technician through BMW STEP. RepairSmith received The 2020 Big Innovation Award by Business Intelligence Group and The Startup of the Yr by the American Business Awards. RepairSmith was as well included in Built in LA'due south 50 Startups to Watch and The Business concern Intelligence Group's 52 Names Leading the Way in Customer Service. RepairSmith offers in-home services to provide machine owners convenient and complete auto repair everywhere.

  

  Automotive Repair Specialist

  Proficient Answer

  The window won't go upwards or downward evenly. Sometimes, the window won't move and you can hear the regulator going.

• Question

  How practise I marshal the window track in the front driver side window on a 2007 Pontiac Vibe?

  

  Ryan Bacigalupi

  Community Answer

  The door will demand to exist disassembled and the drinking glass removed. Once removed, the retainer should be located. The drinking glass will need to be cleaned of all residual silicone and a new retainer and silicone will need to exist applied.

• Question

  Is there a video showing how to practice this?

  

  Yep, at that place are videos on YouTube. Do a search for "how to replace a rider side window." The process is the same.

• Question

  What holds the drinking glass in the track?

  

  Ryan Bacigalupi

  Community Answer

  It depends on the vehicle. On well-nigh there is a wedge-like device that the window sits in, which is bonded with silicone. When replacing the glass, a new retainer and proper silicone should be used.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

• If the window yet doesn't work, check the individual parts and track alignment again or have the car inspected past a mechanic.

Advertisement

• When working, wear a long-sleeved shirt, total pants, airtight toed shoes, and a pair of latex or nitrile gloves for safety. Piece of work slowly to avoid injuries from the glass or individual machine parts.

• The data in this article is intended to provide general answers for oft asked questions most this topic, and may non exist applicable to all vehicles. Please refer to your vehicle's owner'south manual for details about maintenance intervals and other vehicle specifications. If y'all are unsure about your ability to perform any repair, nosotros recommend contacting a certified automotive technician to perform the necessary work.

Advertisement

About This Article

Article Summary Ten

To set an off-rail window, start by removing the screws and bolts holding the automobile door panel in identify. Then, pop the door console off using a thin, sturdy tool, similar a crowbar. With the door interior exposed, utilise your hand to slide the window downwards to the lesser of the window channel as far as information technology will go. Side by side, motility the window until it'due south lined upwardly on the window runway, and reconnect it to the window lift if information technology'southward disconnected. Finally, spray the rollers and track with a lubricant so information technology's easier to raise and lower them, and reattach your car door panel. To learn how to inspect your window parts for damage and bad connections, scroll down!

Did this summary aid you?

Thanks to all authors for creating a page that has been read 162,584 times.

Did this article aid you?

Source: https://www.wikihow.com/Fix-an-Off-Track-Window

Posted by: clementwrapprand.blogspot.com

Share this post