How To Install Windows Xp On Ubuntu System

1 of the most common problems encountered in configuring a dual-kick between Windows XP and Windows Vista happens when you try to install Windows XP on a estimator with Windows 7/Vista already installed. When you install Windows XP, information technology'll remove the bootmgr/BCD used by newer versions of Windows (Vista, 7, & 8) and use its own instead.

Contents

• 1 Installing Windows XP on a PC already with Windows Vista, Windows 7, or Windows 8
  • 1.one Prepping the Machine for an XP Installation
  • i.2 Installing Windows XP
• 2 Setting up the Dual-Boot
  • ii.i Finishing Up
  • 2.two Troubleshooting

Installing Windows XP on a PC already with Windows Vista, Windows 7, or Windows viii

If you follow these instructions, you should exist able to add together Windows XP to a system that already has a newer version of Windows installed – with minimal headache and no loss of data.

Prepping the Machine for an XP Installation

The offset thing to do is to go your arrangement ready for installing Windows XP. There are a couple of things you need to do:

Exercise you already take a free partition or a divide physical disk that you can install Windows XP to? If and then, skip on to the next department.

1. Download the free GParted Live CD or use a commercial partition editor, and boot into information technology.
2. Use the partitioning managing director to shrink the partition with Windows Vista/7 to brand enough roomat the end of the drive for Windows XP.
3. Add a new partition locatedafter the Windows Vista/seven partition you simply shrunk. Make certain it has been formatted every bit NTFS. Information technology doesn't demand to be primary, and should non be active.
4. Reboot into the Windows XP setup CD

It'due south very important to make certain that this partition was created at the stop of the drive, or else y'all might no longer be able to kicking into Windows because your partition numbers and offsets have changed.

Installing Windows XP

If you're installing Windows XP to a separate physical drive, do non disconnect the Windows Vista or Windows 7 bulldoze, and do notchange the drive boot order in the BIOS. This will not help and volition brand information technology terribly difficult to become your dual-kicking working again!

You cannot install Windows XP by running the installer from within a newer version of Windows, instead, you'll have to kicking from the CD:

1. Make sure your BIOS is configured to boot from the CD. Some computers also permit you lot press F8 to pick where you desire to boot from – you may use that choice instead.
2. Put your Windows XP CD in the drive and printing a primal when yous see the "Press any cardinal to enter Windows Setup…" message.
3. If you're installing Windows XP to a SATA drive, brand sure you hitting F6 to load the SATA drives.
4. When you're presented with a screen that has a list of difficult drives and partitions, use the arrow keys to select the empty NTFS partition y'all created in the previous section, then press 'Enter' to go along.
5. Let Windows XP setup finish. It volition reboot several times – do not interrupt it.

Setting up the Dual-Boot

One time Windows XP setup has finished, it'll automatically boot you into the newly installed copy of Windows XP – note that you willnot be able to boot into Vista/seven at this point, nor volition you run into a kicking card pick for it. This is because Windows XP has installed its own bootloader on top of the Windows Vista bootloader, and it does non recognize newer versions of Windows.

• Once in Windows XP, download and install the Microsoft .Net 2.0 Framework SP1.
• Download and install the latest version of EasyBCD.
• One time in EasyBCD, go to the "Bootloader Setup" page, and select "Install the Windows Vista/7 bootloader to the MBR" then "Write MBR" to go the EasyBCD bootloader back.

EasyBCD BCD deployment screen

• Once that's done, head on to the "Add New Entry" page and select "Windows NT/2k/XP/2003" from the drop-down list, requite information technology a name, so printing "Add Entry" to end. Leave the checkbox for automatic configuration checked, andexercise not manually modify the drive in EasyBCD thereafter. The settings EasyBCD chooses maylook incorrect, but it'due south complicated.

EasyBCD calculation WinXP entry

• Now reboot.

You lot won't exist able to select the drive that your Windows XP entry points to. This is because EasyBCD will automatically search for NTLDR, the Windows XP bootloader, and option the right drive for y'all. For more than information, read the primary Windows XP page. Don't try changing this yourself, your arrangement will not boot if you do!

Finishing Upward

• If all has gone well (assuming you followed the directions here to a tee, there is no reason for it not to have), you lot should be presented with the EasyBCD boot carte du jour when you restart your motorcar.
• You'll have the old Windows Vista/7 entry and the new Windows XP entry you created in the steps in a higher place. Selecting each should get y'all into the respecting operating organisation without a problem.
• Feel free to run EasyBCD in either OS and customize your dual-boot past renaming entries, changing the default OS, and modifying the carte du jour timeout.
• Grab yourself a copy of iReboot from the "Useful Utilities" folio – it'southward free and you'll beloved information technology.

Troubleshooting

Delight see the the Troubleshooting XP Boot Issues page for answers to any issues you lot might have.

Source: https://neosmart.net/wiki/easybcd/dual-boot/windows-xp/installing-second/

Posted by: clementwrapprand.blogspot.com

Share this post